AAR urges USDOT on “mode-neutral” guidelines for automation

Written by Stuart Chirls, Senior Editor
Hamberger AAR

Edward R. Hamberger

The trade association of U.S. freight railroads this week urged the federal government to take a balanced approach to automation as a way to a safer, more efficient and more productive industry in the coming years.

The Association of American Railroads in a filing (pdf) to the U.S. Department of Transportation urged policy that encourages innovation across all modes of transportation as the agency develops a regulatory framework for autonomous-vehicle technology.

“Technology has the potential to create breakthrough gains in safety performance, just as it does for other transportation modes,” AAR said. “Automated technologies can detect more, respond faster and provide a larger window for action than a safety system that is subject to the limitations inherent in human eyes, minds and hands.”

“Safety is at the center of all that the industry does, and by ensuring that federal policy enables innovation in the rail sector, we will make a safe network safer,” said AAR President and Chief Executive Edward R. Hamberger. “As our filing states, ‘safety is good business, and good business is good for safety.’ We applaud the USDOT for seeking thorough input from the full array of transportation stakeholders and welcome their effort to develop a paradigm most conducive to innovation and growth.”

In its filing, AAR stated that increased automation will result in meaningful safety improvement.

“U.S. railroads have worked diligently to improve the safety of their operations, with great success; recent years have been among the safest on record for the rail sector. Today, however, over one-third of train accidents are caused by human error. A transition to greater reliance on technology can help compensate for the limitations inherent in human eyes, minds and hands, resulting in continued safety improvement in the coming years.”

Keenly aware of rapid developments in automation by the trucking industry, AAR urged mode-neutral federal transportation policy.

“Railroads are an essential component of our national transportation network, delivering cost-effective and environmentally-friendly freight transportation that reduces highway congestion. For railroads to remain a viable, competitive alternative to other transportation modes, USDOT must support automation in all modes of transportation, including rail. Without equal application across modes, federal policies have the potential to inadvertently shift freight from one mode to another.”

At the same time, AAR asked for “greater certainty” in the regulatory process:

“Today, many proven safety-enhancing technologies may only be used in conjunction with redundant manual inspections required by regulation, unless approved by the Federal Railroad Administration (FRA) for an alternative process through a cumbersome and uncertain waiver process. Greater regulatory certainty would incentivize rail investment in innovation. For example, ongoing regulatory uncertainty has delayed investment in continuous rail inspection technology, which has been proven to reduce rail service failures by 50% over traditional methods.”

The AAR said consideration of highway-rail grade crossings should be part of guidelines for automation of highway vehicles.

“Grade crossing accidents are a critical safety problem that can be meaningfully addressed through the development and deployment of automated vehicles. As the FRA noted in a recent study, nearly all deaths at rail-highway crossings are preventable, as ‘94% of train-vehicle collisions can be attributed to driver behavior or poor judgment.’ Designing motor vehicles to recognize and respond appropriately to warning devices and approaching trains has the potential to save hundreds of lives each year.”

The DOT called for just that in November at a grade crossing safety summit in Washington, where Transportation Secretary Elaine Chao called on technology companies to be part of an encompassing effort to reduce crossing fatalities.

 

Categories: C&S, Class I, Freight, News, PTC, Regulatory, Safety Tags: , , ,